Reception Area Signage
For this 3' x 6' reception area sign, we started with a piece of frosted 1/4" acrylic. Two pieces of powder coated aluminum are attached with spacers top and bottom of sign. Cut black acrylic letters along with the logo, which is three different thicknesses of airbrushed acrylic are surface mounted. The entire sign is mounted 2" off the wall using standoff hardware.

Addtional signs are mounted above book cases, as shown below. These are post mounted 4" of the wall. They are frosted acrylic with cut & printed vinyl lettering and graphics applied to the first surface.